Rubber air spring Isolator Series FAEBI® in stainless steel

Load range:
200 – 600 N / isolator

Load range:
400 – 1.500 N / isolator

Load range:
750 – 3.000 N / isolator

Load range:
2.600 – 4.600 N / isolator

Load range:
2.500 – 8.000 N / isolator

Load range:
6.250 – 15.000 N / Isolator

Load range:
11.500 – 27.000 N / isolator

• The FAEBI® rubber air springs are attached to the existing holes in the machine using the bolts included in the scope of delivery (incl. one nut and one washer each). Anchoring to the floor is not usually necessary.
• A large number of different bolts are available for the respective variants. We will be happy to advise you.

Compressed air gun with pressure gauge for air filling via existing compressed air supply.
Item no. 40-0089

Compressed air gun with pressure gauge for air filling via existing compressed air supply.
Item no. 40-0128

The Bilz pressure control is the ideal addition to applications that do not need automatic level control.
Instead of filling the air springs manually, they are connected to a constant compressed air supply. The working height of the individual insulators can each be individually set with one pressure regulator.

Applications

• Applications with a constant centre of gravity during the production/testing process (no moving machine components, workpieces, etc., steady masses).
• Difficult to access systems, where the manual checking of air pressure in the air springs is impeded.

Advantages of FAEBI® pressure control

• Simple and precise setting of the required pressure for each air spring or control group
• Low maintenance
• Manometer for continuous pressure indication
• Upstream particle filter and water trapCan be configured for any number of air springs or control groups

The mechanical pneumatic level control MPN-LCV with our robust LCV proportional valves is a simple but effective solution to prevent tilting as a result of load changes. The target level is adjusted by turning the knurled adjustment ring and is maintained with an accuracy of ± 1/10 mm.
Item no. 61-0103

If the surface of the FAEBI® element is not completely covered by the bottom edge of the machine or the installation surface, an appropriate cover is required to ensure sufficient load distribution across the air spring. A hood will also provide protection from external damage.

For outdoor use, the cover is additionally equipped with a protective sleeve that protects against UV radiation and splashing water.

Material
Stainless steel