Precision levelling wedge PKA(K)-AL / PKD(K)-AL

PKA(K)-AL/PKD(K)-AL – Aluminium designs of the series bolt-on and bolt-through

Bilz precision levelling wedges in aluminium design hard anodised (hard coating) are distinguished by their very high layer density, high degree of hardness – up to 600 HV and very good wear properties. The levelling wedge is easy to adjust and particularly suitable for EMV applications.All sizes can be supplied with a stainless steel spherical seat.

Applications

Machines for the food and luxury food industries, machines for the packaging, chemical and pharmaceutical industries.

We also offer special solutions without lubricant and for higher loads for applications in clean rooms.

All information on our levelling wedges can be found in our catalog excerpt “Precision levelling wedges” (PDF).

Details (technical data)

Note

Natural colour dark grey
The specified maximum load is composed of static and dynamic loading of the machine.
Mounting with Bilz insulation pads is also possible (see drawing; also in EPDM or clean room applications).
Please contact us if the size, insulation pad mounting or bold size that you are looking for is not listed. In addition to our standard solutions and colours we also carry numerous special solutions. We are always happy to give advice.
General tolerances in accordance with ISO 2768 mK.
Permissible temperature range: -20 °C to +120 °C

graph PKAK-AL

PKA(K)-AL/PKD(K)-AL

Type	max. load N/pc.	L mm	B mm	H centre position mm		d mm	e mm	Internal thread	Adjustment range mm
PKA 1-AL	19,000	115	115	44		50	24	M16	+3/-3
PKA 2-AL	32,000	150	150	47		60	24	M18	+3/-5
PKA 3-AL	57,000	200	200	53		80	27	M20	+4/-5
PKA 4-AL	72,000	200	250	73		95	27	M20	+9/-5
								Drill hole mm
PKD 1-AL	19,000	115	115	44		50	24	22	+3/-3
PKD 2-AL	32,000	150	150	47		60	24	22	+3/-5
PKD 3-AL	57,000	200	200	53		80	27	26	+4/-5
PKD 4-AL	72,000	200	250	73		95	27	26	+9/-5

Type	max. load N/Stk.	L mm	B mm	H centre position mm	Ø D mm	d mm	e mm	Internal thread	Adjustment range mm
PKAK 1-AL	19,000	115	115	54	110	50	24	M16	+3/-3
PKAK 2-AL	32,000	150	150	63	150	60	24	M18	+3/-5
PKAK 3-AL	57,000	200	200	69	150	80	27	M20	+4/-5
PKAK 4-AL	72,000	200	250	89	150	95	27	M20	+9/-5
								Drill hole mm
PKDK 1-AL	19,000	115	115	54	110	50	24	22	+3/-3
PKDK 1-AL	32,000	150	150	63	150	60	24	22	+3/-5
PKDK 1-AL	57,000	200	200	69	150	80	27	26	+4/-5
PKDK 1-AL	72,000	200	250	89	150	95	27	26	+9/-5

Width across flats

Type	inner	outer	Type	inner	outer
PK 1	WAF 6	WAF 13	PKA / PKD 1	WAF 10	WAF 19
PK 2	WAF 10	WAF 19	PKA / PKD 2	WAF 12	WAF 22
PK 3	WAF 12	WAF 22	PKA / PKD 3	WAF 14	WAF 27
PK 4	WAF 14	WAF 27	PKA / PKD 4	WAF 14	WAF 27
PK 5	WAF 14	WAF 27	PKA / PKD 5	WAF 14	WAF 27
PK 6	WAF 14	WAF 27	PKA / PKD 6	WAF 17	WAF 32
PK 7	WAF 17	WAF 32	PKA / PKD 7	WAF 19	WAF 41
PK 8	WAF 19	WAF 41	PKA / PKD 8	WAF 22	WAF 50
PK 9	WAF 22	WAF 50	PKA 3.5	WAF 17	WAF 32
PK 2.5	WAF 10	WAF 19
PK 3.2	WAF 12	WAF 22
PK 3.5	WAF 12	WAF 22
PK 3.8	WAF 12	WAF 22
PK 4.5	WAF 12	WAF 27
PK 5.5	WAF 14	WAF 27