Smartdesk
How can we
help you?
Contact our
service department
  1. Start Bilz AG
  2. Products
  3. Air springs (Rubber air springs / Membrane air springs)
  4. Series FAEBI® HD

Rubber air springs
Series FAEBI® HD

FAEBI®-HD series with adjustable damping

  • Deflection characteristics can be adapted by adjusting the air pressure
  • Wear-resistant, low-maintenance air damping, easy to adjust from the outside
  • No transmission of structure borne noise
  • Deflection characteristics can be adapted by adjusting the air pressure
  • Wear-resistant, low-maintenance air damping, easy to adjust from the outside
  • No transmission of structure borne noise
Description
Technical data
Accessories
Solutions

General product description

Description FAEBI®-HD

FAEBI®-HD – rubber air spring isolator with adjustable damping

The combined rubber-air spring isolator FAEBI®-HD with adjustable damping comprises of an elastomer metal bonding with reinforced side wall and a two-chamber system. To achieve the greatest possible damping effect the interior of the air spring is divided into two air chambers connected by an air hose (load and damping volume). An adjustable throttle valve is used to set the flow cross section to the desired damping effect from the outside. The significantly higher damping effect compared to a single chamber system (FAEBI®) reduces the resonance amplification substantially and the machine movements fade noticeably faster. The increased energy absorption also has a positive effect on the manufactured goods and on machine and tool wear.

Please contact us, we would be happy to advise you.

Technische Zeichnung der Abklingkurven von Bilz Luftfedern Typenreihe Faebi

Comparison of decay curves

Example illustrating the decay behaviour of a single-chamber and twin-chamber system

Technical Data and Variants

Variant selection

Please select a suitable rubber air spring so that the maximum load (sum of static and dynamic load) is not exceeded
Please get in touch, we would be happy to assist you in selecting the most suitable elements.

Notes on FAEBI®-HD variants
  • If the bottom edge of the machine does not completely cover the diameter (∅ D) of the rubber air spring, we recommend the use of our special cover (see “Accessories” section for the individual air spring types).
  • Permissible temperature range: -20 °C to +60 °C
  • The elements are attached to the holes provided on the machine using the bolts supplied. Anchoring to the floor is usually not necessary.
  • Please bolt in by hand only, do not use a wrench! Please also fasten the corresponding nut with low torque only.
  • The machine is placed on the deflated element, which is then inflated in stages using the standard valve until dimension H (= working height) is reached. The maximum specified air pressure must also not be exceeded!
  • Ventilation and venting may only take place under load (please observe max. permissible pressure)!
  • Up to +/-5 mm are available for levelling.
Technische Zeichnung mit Abmessungen zu Bilz Luftfedern Typenreihe Faebi HD

Series FAEBI® 200-HD

Series FAEBI® 200-HD

Load range:
6.250 – 15.000 N / isolator

Show variants
FAEBI® 200-HD type select
Variant
Item no. FAEBI
Load N/pc.
max. pressure bar
A mm
Ø D mm
H approx. mm = working height
H deflated mm
Ø d mm
h mm
G mm
Variant
Hart
Item no. FAEBI
40-0054
Load N/pc.
7.000-15.000
max. pressure bar
6
A mm
260
Ø D mm
236
H approx. mm = working height
89
H deflated mm
90
Ø d mm
130
h mm
8
G mm
M16
Variant
Standard
Item no. FAEBI
40-0053
Load N/pc.
6.250-15.000
max. pressure bar
6
A mm
260
Ø D mm
236
H approx. mm = working height
89
H deflated mm
90
Ø d mm
130
h mm
8
G mm
M16
Grafik zur Darstellung der Eigenfrequenz von Bilz Luftfedern Typenreihe Faebi 200-HD

Natural frequencies Faebi® 200-HD
—
Vertikale Eigenfrequenz = vertical natural frequency
Last = load

Series FAEBI® 300-HD

Series FAEBI® 300-HD

Load range:
11.500 – 29.500 N / isolator

Show variants
FAEBI® 300-HD type select
Type
Variant
Item no. FAEBI
Load N/pc.
max. pressure bar
A mm
Ø D mm
H approx. mm = working height
H deflated mm
Ø d mm
h mm
G mm
Type
FAEBI® 300-HD
Variant
hard
Item no. FAEBI
40-0063
Load N/pc.
14.000-29.500
max. pressure bar
6,5
A mm
370
Ø D mm
340
H approx. mm = working height
89
H deflated mm
94
Ø d mm
200
h mm
8
G mm
M20
Type
FAEBI® 300-HD
Variant
standard
Item no. FAEBI
40-0061
Load N/pc.
11.500-27.000
max. pressure bar
6
A mm
370
Ø D mm
340
H approx. mm = working height
89
H deflated mm
93
Ø d mm
200
h mm
8
G mm
M20
Grafik zur Darstellung der Eigenfrequenz von Bilz Luftfedern Typenreihe Faebi 300-HD

Natural frequencies Faebi® 300-HD
—
Vertikale Eigenfrequenz = vertical natural frequency
Last = load

Series FAEBI® 430-HD

Series FAEBI® 430-HD

Load range:
27.500 – 66.000 N / isolator

Show variants
FAEBI® 430-HD type select
Type
Variant
Item no. FAEBI
Load N/Stk.
max. pressure bar
A mm
Ø D mm
H approx. mm = working height
H deflated mm
Ø d mm
h mm
G mm
Type
FAEBI® 430-HD
Variant
Hart
Item no. FAEBI
40-0070
Load N/Stk.
30.000-66.000
max. pressure bar
6,1
A mm
500
Ø D mm
480
H approx. mm = working height
91
H deflated mm
97
Ø d mm
315
h mm
12
G mm
M20
Type
FAEBI® 430-HD
Variant
Standard
Item no. FAEBI
40-0067
Load N/Stk.
27.500-65.000
max. pressure bar
6
A mm
500
Ø D mm
480
H approx. mm = working height
91
H deflated mm
96
Ø d mm
315
h mm
12
G mm
M20
Grafik zur Darstellung der Eigenfrequenz von Bilz Luftfedern Typenreihe Faebi 430-HD

Natural frequencies Faebi® 430-HD
—
Vertikale Eigenfrequenz = vertical natural frequency
Last = load

Series FAEBI® 580-HD

Series FAEBI® 580-HD

Load range:
47.000 – 115.000 N / isolator

Show variants
FAEBI® 580-HD type select
Type
Variant
Item no. FAEBI
Load N/pc.
max. pressure bar
A mm
Ø D mm
H approx. mm = working height
H deflated mm
Ø d mm
h mm
G mm
Type
FAEBI® 580-HD
Variant
Super Hart
Item no. FAEBI
40-0081
Load N/pc.
60.000-115.000
max. pressure bar
6,9
A mm
680
Ø D mm
650
H approx. mm = working height
126
H deflated mm
135
Ø d mm
380
h mm
14
G mm
M24
Type
FAEBI® 580-HD
Variant
Hart
Item no. FAEBI
40-0145
Load N/pc.
56.000-108.000
max. pressure bar
6,5
A mm
680
Ø D mm
650
H approx. mm = working height
126
H deflated mm
133
Ø d mm
380
h mm
14
G mm
M24
Type
FAEBI® 580-HD
Variant
Standard
Item no. FAEBI
40-0080
Load N/pc.
47.000-100.000
max. pressure bar
6
A mm
680
Ø D mm
650
H approx. mm = working height
126
H deflated mm
130
Ø d mm
380
h mm
14
G mm
M24
Grafik zur Darstellung der Eigenfrequenz von Bilz Luftfedern Typenreihe Faebi 580-HD

Natural frequencies Faebi® 580-HD
—
Vertikale Eigenfrequenz = vertical natural frequency
Last = load

accessories FaEBI®-HD

FAEBI® HD fixing bolts

Fixing bolts

  • The FAEBI® rubber air springs are attached to the existing holes in the machine using the bolts included in the scope of delivery (incl. one nut and one washer each). Anchoring to the floor is not usually necessary.
  • A large number of different bolts are available for the respective variants. We will be happy to advise you.
Show Item numbers
Item numbers FAEBI®-HD fixing bolts
Type
Item no.
Thread
Material
Length mm
Type
FAEBI® 200-HD
Item no.
19-0324
Thread
M16
Material
Galvanised steel
Length mm
125
Type
FAEBI® 300-HD / 430-HD
Item no.
19-0327
Thread
M20
Material
Galvanised steel
Length mm
150
Type
FAEBI® 580-HD
Item no.
19-0329
Thread
M24
Material
Galvanised steel
Length mm
150

FAEBI® HD handpump

Handpump

Hand pump for manual air filling.
Art.-Nr. 40-0128

FAEBI® HD pressure control

Pressure control

The Bilz pressure control is the ideal addition to applications that do not need automatic level control.
Instead of filling the air springs manually, they are connected to a constant compressed air supply. The working height of the individual insulators can each be individually set with one pressure regulator.

Applications

  • Applications with a constant centre of gravity during the production/testing process (no moving machine components, workpieces, etc., steady masses).
  • Difficult to access systems, where the manual checking of air pressure in the air springs is impeded.


Advantages of FAEBI® pressure control

  • Simple and precise setting of the required pressure for each air spring or control group
  • Low maintenance
  • Manometer for continuous pressure indication
  • Upstream particle filter and water trapCan be configured for any number of air springs or control groups
Show item numbers
Item numbers FAEBI®-HD pressure control
Pressure control
Item no.
Pressure control
3 Pressure regulators incl. pneumatic connection and hose set
Item no.
40-0179
Pressure control
4 Pressure regulators incl. pneumatic connection and hose set
Item no.
40-0180

FAEBI® HD compressed air gun

Compressed air gun

Compressed air gun with pressure gauge for air filling via existing compressed air supply.
Item no. 40-0089

FAEBI® HD mechanical pneumatic level control MPN-LCV

Mechanical pneumatic level control MPN-LCV

The mechanical pneumatic level control MPN-LCV with our robust LCV proportional valves is a simple but effective solution to prevent tilting as a result of load changes. The target level is adjusted by turning the knurled adjustment ring and is maintained with an accuracy of ± 1/10 mm.
Item no. 61-0103

FAEBI® HD protective cover

Protective cover

If the surface of the FAEBI®-HD element is not completely covered by the bottom edge of the machine or the installation surface, an appropriate cover is required to ensure sufficient load distribution across the air spring. A hood will also provide protection from external damage.

Material
Steel sheet (primed black)

Show item numbers
Technical drawing, shows the legend for the dimensions of the cover for the Bilz Faebi air spring.

Dimensions protective cover for FAEBI air spring

Item numbers FAEBI®-HD protective cover
Type
Item no.
A mm
D mm
s mm
h mm
d mm
Type
AH-FAEBI® 200-HD
Item no.
40-0007
A mm
18
D mm
255
s mm
5
h mm
60
d mm
3
Type
AH-FAEBI® 300-HD
Item no.
40-0009
A mm
22
D mm
360
s mm
5
h mm
60
d mm
3
Type
AH-FAEBI® 430-HD
Item no.
40-0012
A mm
22
D mm
500
s mm
10
h mm
60
d mm
4
Type
AH-FAEBI® 580-HD
Item no.
40-0014
A mm
27
D mm
680
s mm
10
h mm
60
d mm
4

Solutions

Contact us

How may we help you?

Please contact our responsible sales representative. We look forward to your inquiry and will get back to you as soon as possible!

Print
Share
Follow us on
News

Farewell to well-deserved retirement

We were allowed to say goodbye to our colleague Mr. Michael Hempel in retirement.

Learn more
 Show all news
Trade fair dates

AUTOMOTIVE TESTING EXPO, Chennai/India, 18 - 20 April 2023

Automotive test and development expo

Learn more
 All trade fair dates
Contact

Bilz Vibration Technology AG
Böblinger Straße 25
D-71229 Leonberg

+49 7152 30 91-0 +49 7152 30 91-10 info@bilz.ag
Your expert for vibration isolation
© 2023 Bilz Vibration Technology AG

Contact

Phone

+49 7152 30 91-0

Email

info@bilz.ag

Address

Bilz Vibration Technology AG
Böblinger Straße 25
D-71229 Leonberg

Google Maps

Quicklinks

Find your distribution partner
Technical data sheets
Our vacancies
Our customers

Language

Data sheet

Please make a selection first to be able to download the data sheet.

Offer

Please make a selection first to be able to request a quote.

Item no.

Menge
Request a quote Bookmark
keine Suchergebnisse
1 SuchergebnisSuchergebnisse
XS
SM
MD
LG
XL
XXL